Basic Ciso CME Configuration – Place a simple call

Introduction :

First Step on CME. You want to place a simple call between two phones. You will get below the simple configuration tu use.

You can use the software Cisco IP Communicator as a softphone.

Schema :

Simple CIPC and CME

Configuration :

 max-ephones 24
 max-dn 48
 ip source-address port 2000
 max-conferences 8 gain -6
 transfer-system full-consult
ephone-dn  1
 number 2000
ephone-dn  2
 number 2001
ephone  1
 device-security-mode none
 mac-address 00FF.1270.128B
 button  1:1
ephone  2
 device-security-mode none
 mac-address 000C.291C.0E35
 button  1:2

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: